June 2021

Ranking of energy-saving aluminum windows 3.15-inch frames - comparison of triple-pane aluminum windows

categoryLowest price

Prices for aluminum profiles listed in the ranking range from 4,362 USD to 9,174 USD (prices for a set of 11 windows and doors).

The first place for the lowest price is taken by the Aliplast Genesis 75 with a price of 4,362 USD. Right behind him, with a slightly higher price of 4 867 USD, is Aluprof MB-86, and the podium is closed by Ponzio PE78N with a price of 4,945 USD.

We remind you that the given price includes the finished product from our manufacturers. Do you have a product that could be ranked high?Contact us!

  • 1st place: Aliplast Genesis 75 ; 4,362 USD
  • 2nd place: Aluprof MB-86 ; 4,759 USD
  • 3rd place: Ponzio PE78N ; 4,835 USD
  • 4th place: Yawal TM 77HI ; 5,251 USD
  • 5th place: Cortizo Cor-80 Industrial ; 5,637 USD
  • 6th place: Reynaers Masterline 8 ; 6,563 USD
  • 7th place: Schuco AWS 75 ; 9,174 USD

categoryBest quality

The first place in the “best quality” category belongs to the Aluprof MB-86 system.

Aluprof MB-86 was awarded the first place for the completeness of the system, min. sash and frame height (3.5 in) and the fastest production time (from 3 weeks).

With the MB-86 system, we can make a balcony with a perimeter frame, a balcony with a low threshold, large-size structures, windows with a hidden sash, folding doors, sliding doors, tilt and slide patio doors, casement windows and panel doors. 

For each parameter, we awarded Aluprof the maximum number of points with the exception of U-Factor 0.15 (Uw 0.83), which is slightly different from Schuco AWS 75 (U-Factor 0.14 / Uw 0.78) and Yawal TM 77HI (U-Factor 0.14 / Uw = 0.80).

Right behind the Aluprof MB-86 window there is Yawal TM 77HI with a total of 16.5 points. TM 77HI ensures maximum illumination of rooms thanks to the low sash and frame height and saves energy consumption thanks to U-Factor 0.14.  However, it stands out due to the lack of a valuable bifold. The folding door from Yawal is a solution that differs from the current leaders, therefore we recognize that there is a lack of them. However, we know from certain sources that work is underway on a modern solution in this matter. We keep our fingers crossed for a positive implementation! The downside is also the lack of assured manufacturers who would be able to produce a system at such a high level and at the same speed as Aluprof.

As many as 3 systems are in third place – Aliplast Genesis 75, Ponzio PE78N and Schuco AWS 75. All of those systems have a very good sash and frame height, except for Aliplast, which has this parameter at 4.02 in and is 0.55 in higher than Cortizo Cor 80 Industrial, which boasts the lowest sash and frame height (3.46 in).

The lower position of Ponzio, Schuco and Reynaers systems is mainly due to the fact that the system providers did not provide us with manufacturers who would assembly a given profile at the highest level.  Dear System Provider – if you know producers who can fight with your system for a higher place in our ranking – Write here!

  • 1st place: Aluprof MB-86; 18 points
  • 2nd place: Yawal TM 77HI; 16.5 points
  • 3rd place: Ponzio PE78N; 15 points
  • 4th place: Aliplast Genesis 75; 15 points
  • 5th place: Schuco AWS 75; 15 points
  • 6th place: Cortizo Cor-80 Industrial; 14.5 points
  • 7th place: Reynaers Masterline 8; 14 points

categoryQuality / Price

The winner is the Aluprof MB-86 aluminum system with a score of 3.70. Aliplast Genesis 75 comes second with a score of 3.36 and Yawal TM77HI comes third with a score of 3.06.

Aluprof MB-86 won in the quality / price category, because its system is complete, allows a lot of light into the interior of the building and has good thermal parameters. Definitely the highest quality of the finished product at a repeatable quality and price that can be fully satisfying. Hats off to Aluprof! Not only for the system – but also for trained armies of manufacturers who are able to use its systems to produce perfect – world-class Aluminum windows!

The Aliplast Genesis 75 took the second place. This is mainly due to its low price. In terms of quality, it differs with  the sash and frame height (4.02 in) and the production time (6-7 weeks).

Yawal TM 77HI takes the podium in 3rd place with a sash and frame height of 3.5 in, which is one of the best results. Yawal lacked a folding window to win, a slightly lower price and faster production time.

  • 1st place: Aluprof MB-86; 3.78
  • 2nd place: Aliplast Genesis; 3.44 
  • 3rd place: Yawal TM 77HI; 3.14
  • 4th place: Ponzio PE78N; 3.10
  • 5th place: Cortizo Cor-80 Industrial; 2.57 
  • 6th place: Reynaers Masterline 8; 2.13
  • 7th place: Schuco AWS 75; 1.64

Want to know how much your business can gain by importing joinery from Poland?